FMVSS 210 Seat Belt Anchorage Testing: How FAD 1 and FAD 2 Work

FMVSS 210 Seat Belt Anchorage Testing: How FAD 1 and FAD 2 Work

September 1, 2027 is the general compliance date for revised FMVSS No. 210 seat belt anchorage strength testing. Vehicle manufacturers can choose between the Force Application Device (FAD) procedure and an updated body-block procedure with defined positioning zones. For labs using the FAD method, the seat layout determines when the smaller FAD 2 is needed.

How the FAD loads the seat belt anchorages

The FAD uses a torso and pelvis to represent the parts of a seated occupant that engage the belt. The fixture sits in the vehicle seat and is secured with the belt. The test rig pulls on the fixture, the fixture loads the belt, and the belt transfers that force to the anchorages and supporting vehicle structure. Section S5.5 of FMVSS 210 governs fixture alignment, seatback contact, belt routing, and actuator connections.

FAD test method Static load
Applicable lap-belt test, S5.1(b) 22,241 N (5,000 lbf) through the bridged pull yoke
Applicable lap-and-shoulder-belt test, S5.2(b) 13,345 N (3,000 lbf) at the pelvis and 13,345 N (3,000 lbf) at the torso, applied simultaneously

In both procedures, the rig pulls in the direction the seat faces, starting at 5 to 15 degrees above horizontal. The test reaches the specified load within 30 seconds and holds it for 10 seconds. Read 49 CFR § 571.210.

When to use FAD 1 or FAD 2

FAD 1 is the larger fixture. When S4.2.4 calls for simultaneous loading of multiple designated seating positions, the FAD procedure starts with a FAD 1 at each position being tested.

FAD 2 is the smaller fixture used when adjacent devices interfere under the conditions specified in S5.4. For example, if FAD 1 fixtures at an inboard and an outboard position in a forward-facing row touch during setup, the procedure calls for substituting FAD 2 at the inboard position first. Section S5.4 gives the substitution order for other seating layouts. Read NHTSA’s final rule.

What the September 2027 deadline means

NHTSA’s final rule took effect October 17, 2024, and allows early compliance. For vehicles manufactured on or after September 1, 2027, the standard generally requires one of the two updated test methods. Adopting a FAD is optional. Manufacturers may select the updated body-block method. NHTSA identified an additional year for multistage manufacturers and vehicle alterers. See the final rule’s compliance dates.

As of November 19, 2026, NHTSA has proposed extending the compliance date to September 1, 2030 for vehicles with a gross vehicle weight rating above 10,000 lb (4,536 kg). The current regulation still shows September 1, 2027 as the general date. Read the proposed heavy-vehicle extension.

SCHAP’s FAD 1 and FAD 2 fixtures

SCHAP Specialty Machine offers FAD 1 (SKU 610R1019) and FAD 2 (SKU 610R1020). Each fixture comes with torso and pelvis sections, attachment components, and a 3D scan validation certificate. SCHAP also offers a storage cart for the fixtures.

To discuss your seating layout or request a quote, use the inquiry form on the product page or call 616-846-6530.

Leave a Reply